Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

FAB is a certified SAP Add-on that is packaged using the SAP Add-On Assembly Kit (AAK). The FAB add-on consists of a series of transport requests grouped together as a delivery package. When imported, the FAB add-on is registered as an additional software component in the system. Instead of sending transport requests to customers, new features and bug fixes are installed in the SAP system as a package. The transaction SAINT (SAP Add-On Installation Tool) is used in a fresh installation of the FAB add-on or for a major version upgrade. On the other hand, the transaction SPAM (Support Package Manager) is used to install minor updates in support packages (patch). The following steps are relevant for a fresh FAB Add-On installation or when upgrading an existing FAB Add-On to the latest version.

Package Installation

Installation Packages will be provided by IQX depending on the deployment method and version of the SAP system. It will be labeled as either Frontend or Backend.

Central Hub Deployment

  • In SAP Backend, install the package for Backend using transaction SAINT in Client 000

  • In SAP Frontend Gateway, install the package for Frontend using transaction SAINT in Client 000

Embedded Deployment

This option is only applicable for SAP versions 7.40 or higher

  • Install the package for Backend using transaction SAINT in Client 000

When disassembling the OCS Packages, you may encounter the warning message that says The OCS Package is not digitally signed.

This message is expected as the signature is automatically turned on when using SAINT version 66 with SAPNOTE 2520826.

Installation Steps via SAINT transaction

Fresh Installation Excluding Any Patch Release

  1. Login to client 000, go to transaction SAINT

  2. Load Installation Packages

  1. Decompress file as necessary.

  1. Once package is uploaded, click on START to begin the installation process.

  1. Select the installable IQX component and click on CONTINUE.

  1. Choose on Target Support Package if available. Click on CONTINUE to proceed.

  1. CONTINUE on Calculated installation queue.

  1. Confirm on processing mode.

  1. Wait while SAP is in progress installing.

  1. Once Add-On was successfully imported, you may click on LOGS to display transport messages or FINISH to proceed on SAINT Runtime Analysis.

  1. View Runtime Analysis

Fresh Installation Including a Patch Release

  1. Login to client 000, go to transaction SAINT.

  2. Load Installation Packages. We need to include two (2) different files:

    1. Base installation file with pattern ECC_VVV_K-YYYCOINIQX.SAR where VVV is the minimum SAP version required and YYY is the FAB version release.

    2. Patch installation file with pattern K-YYYB1INIQX.SAR where YYY is the FAB version release.

**Please note that filename may differ depending on the deployment option done in your system.

image-20240301-105342.pngimage-20240301-094112.png

*Customers may also opt to upload the files in their EPS Inbox. In this case, packages must be loaded from their application server.

image-20240301-105556.pngimage-20240301-105649.png
  1. Decompress files as necessary. Repeat this process for both the base installation package and the patch package.

image-20240301-105926.pngimage-20240301-110010.png
  1. Once packages are uploaded, click on START to begin the installation process.

image-20240301-110051.png
  1. Select the installable IQX component and click on CONTINUE.

image-20240301-110208.png
  1. Choose on Target Support Package if available. Click on CONTINUE to proceed.

image-20240301-110228.pngimage-20240301-110240.png
  1. CONTINUE on Calculated installation queue.

image-20240301-110254.png
  1. Confirm on modification adjustment added by the patch package. Then, click on CONTINUE.

image-20240301-110311.png
  1. Confirm on processing mode.

image-20240301-110526.png
  1. Wait while SAP is in progress installing.

image-20240301-110657.png
  1. Please note that these warnings are to be expected. Click on IGNORE button at the top part.

image-20240301-110610.png
  1. Once Add-On was successfully imported, you may click on LOGS to display transport messages or FINISH to proceed on SAINT Runtime Analysis.

image-20240301-110829.png
  1. View Runtime Analysis

image-20240301-111053.pngimage-20240301-111027.pngimage-20240301-110944.png

Upgrade Installation Including a Patch Release

The steps required for an upgrade installation with a patch release are identical to those for a fresh installation, including a patch release, except for the files to be uploaded. Please follow the steps outlined for a fresh installation with a patch release, but utilize the file packages listed below.

  • Upgrade installation file with pattern ECC_VVV_K-YYYCHINIQX.SAR where VVV is the minimum SAP version required and YYY is the FAB version release.

  • Patch installation file with pattern K-YYYB1INIQX.SAR where YYY is the FAB version release.

**Please note that filename may differ depending on the deployment option done in your system.

Post-installation steps

Import Table Contents

The Transport Requests for the FAB Sample Applications and the Table Contents are packaged in 3 additional ZIP files. These objects are required for the FAB Workbench configuration and layout and should be imported using the Transport Management System (Transaction STMS) in all active SAP Clients where FAB is being used for development and testing which may include Development, Testing, Sandbox, Quality, and Productive clients.

Transport

Description

Objects

IQPK900847

Client independent config - FAB v3.3.0

Table Contents

  • /IQX/FAB_LIC_CFG

  • /IQX/FAB_WB_CFGA

  • /IQX/FAB_WB_CFGB

  • /IQX/FAB_WB_CFGC

  • /IQX/FAB_WB_CFGD

  • /IQX/FAB_WB_CFGE

  • /IQX/FAB_WB_CFGF

  • /IQX/FAB_WB_CFGG

  • /IQX/FAB_WB_CFGH

  • /IQX/FAB_WB_X4A

  • /IQX/FAB_WB_X4A2

  • /IQX/FAB_WB_X4B

  • /IQX/FAB_WB_X4C

  • /IQX/FAB_WB_X4D

  • /IQX/FAB_WB_X4E

  • /IQX/FAB_WB_X6A

  • /IQX/FAB_WB_X6A2

  • /IQX/FAB_WB_X6B

  • /IQX/FAB_WB_X6B2

  • /IQX/FAB_WB_X6E

  • /IQX/FAB_WB_X6E2

  • BAPIF4T

IQPK900848

Client dependent config - FAB v3.3.0

View Cluster Maintenance: Data

  • /IQX/FAB_CONFIG_TABLES

Table Contents

  • /IQX/FORMS_WIDG

  • /IQX/WIDGETHD

  • /IQX/WIDGET_WF

  • /IQX/WIDG_DATA

Customizing: Table Contents

  • LT_VARIANT

View Maintenance

  • SWFDVEVTY2

IQPK900849

Sample applications definition - FAB v3.3.0

Table Contents

  • /IQX/ACT_STATUS

  • /IQX/FAB_SCRIPT

  • /IQX/FAB_WF

  • /IQX/FAB_XML

  • /IQX/FORMHD

  • /IQX/FORMS_CFG_I

  • /IQX/FORMS_DATA

  • /IQX/FORMS_ELEM

  • /IQX/FORM_ENTITY

  • /IQX/FORM_ESCAL

  • /IQX/FORM_RECORD

  • /IQX/STATUS_ACT

IQPK900851

IQX_MY_FORMS ver.10 - 202307

Dynamic IQX My Forms application

IQPK900852

IQX - OneList Adapter v3.3.0 - Configuration

Table Contents

  • /IQX/OL_INT_ACT

  • For S4HANA deployment, please apply transport S4HK901471 to adjust changes for S4HANA.

Index Calculation

The SAPUI5 application index provides an indexing and caching mechanism for information related to apps, components, and libraries in the SAPUI5 ABAP repository and related to components and libraries in the SAPUI5 distribution layer. The index is calculated by the report Calculation of SAPUI5 Application Index for SAPUI5 Repositories (/UI5/APP_INDEX_CALCULATE). The report /UI5/APP_INDEX_CALCULATE has to be executed in the system where the FAB service is running whenever the content of the SAPUI5 ABAP repository has been changed.

Failure to execute this step may result in the browser console showing a message such as ‘REQUESTED RESOURCE OUTDATED’.

Step 1

Go to transaction SE38 and Execute the report /UI5/APP_INDEX_CALCULATE.

Step 2

Go to the Single SAPUI5 Repository Only tab and enter each of the following SAPUI5 Repository, then click Execute.

/IQX/FAB2 Fiori App Builder V2

/IQX/FAB_ICONS FAB Icon Picker

/IQX/PROCESS_EDIT IQX FAB Process Editor

/IQX/JSON_EDIT JSON Editor

/IQX/MY_FORMS My Forms for Fiori Launchpad

Post-Installation Configuration and Validation

Perform the following configurations in the order below to completely set up the FAB add-on.

1. IQX Services Activation

2. General Configuration

3. Editor Configuration

4. App Configuration

5. Additional Configuration for Older SAP Systems ( < 7.40 )

6. Post Installation Validation

7. Troubleshooting Configuration


  • No labels